Posts Tagged ‘Investment’
Ice fishing shelters: Reasons why an ice fishing shelter is worth the investment
For those of you who can not get enough fishing time in the summer months, you can just slip right into the growing sport of ice fishing huts. Ice fishing shelters have certainly grown in popularity in recent times and many facilities may be estimated without fighting all summer fishing equipment.
As with all fishing shelter, want you to be comfortable and enjoy your favorite winter past time. Placing a concrete floor over the ice would be a start with a durable tent. Remember, a fishing village shelter house certainly different from an ice fishing.
As with any ice protection of the main purposes:
Elimination of the wind as much as possible
and hold heat in as much as possible
A portable fishing shelter can be easily moved and transported to another place where the fish can bite, which of course is where you will reside. Of course, then again, if you do a little budget, you may prefer a permanent structure, so you may want a home-made shelter, a permanent structure is more or less.
Depending on how hardy you are and who you will depend on your fishing pole-protection, and they come in a variety of styles;
Homemade (Put in your personal note)
Folding (to get you through)
ATV Mounting
Portable Flip-Over
Ice fishing shelter provides vary and there are plenty of options and designs to choose from to get so what is the right thing for you to see some thoughts about your participation, what would you like to try. If you try ice fishing for the first it can be a bit overwhelming at first, but you will soon know what you are looking for when your in the winter elements. The size of your property depends on the number of fishermen to place, and what other amenities that you need to depend on the structure.
Some things you can think of are:
Storage – tackle Devices
Security
Capability moving around the lake
Comfort – Size
Overall enjoyment
You might want to start with the basics and adding. There are a lot of information out there to take so time to see the new products and improvements are available. choose from the variety of designs and use, and what you should. Spinner bait, for example, in weed or not in the weeds. A good choice if you find out what fish are in the lake. But there are hundreds of bait fish out there, including your own, but it all depends on what you are out there fishing in the lake. But first get your ice fishing shelter so you can enjoy your day of fishing on the ice.
Your Fly Rod – Protect Your Investment
You probably spent a good amount of money on your fly rod, and it might be one of the most expensive pieces of gear you own. Here’s some ways you can protect your fly rod – and the money you’ve spent.
Rod Tube or Case
If your fly rod did not come with one, but a tube or case for it. A rod tube will protect your rod when it’s not in use, and especially when traveling with it on your fly fishing outings. It is amazing the number of fly rods that get accidentally broken because the tip or other part was crushed while closing a door.
It’s easy to not take the time to put your rod into its case when you are traveling from spot to spot, but the extra few minutes you take doing so could be the difference between a great day out or a very disappointing one with a broken favorite rod.
Clean And Inspect The Guides
The majority of fly rods have two different types of guides attached to them. Guides are the common North American name for what the line runs through. Most fly rods have at least one, sometimes two and on longer rods, sometimes three “Stripper Guides.” These are the guides closest to the reel seat, and usually have two feet attached to the rod blank with thread and then covered with an epoxy finish.
The guides above this are usually snake guides but single foot ring guides made of a ceramic material are becoming more common.
Some rod builders believe that the single foot ring guides provide better casting efficiency by keeping the fly line away from the rod blank, thereby preventing “line slap” against the rod when casting. However, traditionalists still prefer snake guides.
In either case, you should inspect the guides for wear. As the fly line travels through the guides, over time ridges and damage caused by wear and tear can occur. If you see any wear and tear on a guide, you should have the guide replaced.
Ceramic guides can be brittle and can crack. If any cracks are noticed in the ceramic rings of these types of guides, you should have that guide replaced immediately before you do any more fishing with the rod.
A regular cleaning of the guides with a cotton swab is recommended. Guides can accumulate dirt which is then transferred to your line. A dirty line will have a decreased life span and won’t cast as well as a clean line.
Inspect/Repair Guide Finish
The guides are attached to the fly rod with thread that is wrapped around the foot and the rod blank. The thread is then finished with an epoxy finish. Many fly rod builders use a thick epoxy over these thread wraps. The thicker the finish, often the more of a tendency it will have to develop cracks. When cracks develop, moisture can enter and start to degrade the thread and even the guide foot.
If you notice degradation of the finish, you may want to consider having the thread wraps redone and refinished.
Clean The Cork Handle
Over time, the cork handle will also accumulate dirt. You can safely and easily clean a cork handle using water and a soap scrub pad. If you have used your rod a lot and never cleaned the handle, you might be amazed at how good the cork will look after you’ve cleaned it.
Rinse The Rod With Water
Make it a practice to regularly rinse your fly rod with water and wipe it down with a cloth. Dirt, grease and grime can, over time, degrade it.
Lubricate the Ferrule
… but not with wax! Many people still use a wax or rub the ferrule joint against their nose in order to transfer some oils to the ferrule. You should never do this with a modern graphite ferrule. Wax and the like will attract dirt, and could actually cause damage to your ferrule when you join and un-join the sections of your fly rod. Instead, use a commercial product like “Ferrule Lube” to help protect and lubricate your fly rod’s ferrules.